1. Power on the controller

Start by powering the controller using a Power over Ethernet (PoE) connection. Once powered, the device will start to boot.

2. Observe the indicator lights

The controller features lights associated with specific numbers. As the system boots, these lights will flash in a sequence that corresponds to numerical values.

3. Watch the IP address sequence

During startup, the controller displays its IP address through a series of flashes.

The IP address is divided into four parts (octets). The controller flashes each octet one at a time, starting with the first and moving to the fourth.

Carefully watch the flashes for each segment and note the numbers next to them as they appear.

4. Repeat the cycle if needed

The EIDC+ Controller will cycle through this process three times before the startup sequence is complete.

Tips for accuracy

For a better setup or troubleshooting experience:

• Watch the sequence at least twice to ensure you’ve recorded the correct values.
• Write down the numbers as you observe the flashing lights.
• If you miss a number, wait for the cycle to repeat.

Watch the tutorial

You can also watch how to find the IP address for your EIDC controller:

Subscribe to our YouTube channel

Now that you know how to find the IP address of your EIDC+ Controller, you’re ready to move forward with setup or troubleshooting.

For more step-by-step tutorials like this, including guides for the EIDC32, be sure to subscribe to our YouTube channel so you never miss an update.